All the multiplexers have a Debug Mode of operation. This mode is very useful to test if data is arriving properly at the multiplexer inputs. In debug mode, the multiplexers will read, during 20 seconds, data arriving at the serial and WiFi inputs, the SeaTalk1 input (not the N2k0183) and the N2Kbus (the N2K0183 only) and will print that data in the browser webpage. No data will be output. The following video shows the messages read in the Debug Window in the case of the Nmea3Wifi multiplexer receiving Nmea0183 data at the P1 input port:

 

This feature allows the NMEA3WIFI and the N2K0183 to operate as analysing tools for the SeaTalk1 and N2K buses, respectively. You can get more information here for the case o the NMEA3WIFi and here for the case of the N2K0183.

0
0
0
s2sdefault