I would like to use the mux for wind,depth and log. I´m worried, that with the slow speed and update rate of 40 seconds, that the mux gets a data over run. the idea is to convert the data via another esp32 the data to nmea2000. The Nmea 2000 conversation I have already tested and it works. In addition only one wifi output is need. Use the NMEA2wifi for AIS and GPS for Navionics
I used for several years the NMEA2Wifi Mux already and it´s working well. I had one of your NMEA4Wifi Mux´s already (worked well), but it disappeared when I was in hospital (wife displaced it ).
Just order a replacement....(better than trouble with the wife )
Discussion and support for the Nmea4Wifi multiplexer - a 4-input Nmea 0183 wifi multiplexer.
1 post • Page 1 of 1