Vela Navega Forum

Hello,

I am very sorry but I did not make the comparison between the two versions. I will try to do it shortly. As this requires a lot of attention, may be what I will do is to start with the 2.5 version and just replace the few lines that deal with the depth conversion with the ones that exist in 2.6. I will let you know. Later I will do a complete verification.

Regards Luis

Hello AL15000,

I just discovered the problem with version 26. The converted (from SeaTalk1) Nmea 0183 sentences do not terminate with CR LF. I expect to correct the bug and I will create version 27.

Thank you for the feedback and sorry for the time taken to correct this!

Regards, Luis

PS: Here is the corrected version:

NMEA4WIFIV27.BIN

If you have the possibility of testing I would be very grateful if you could send feedback. The only change from version 26 is that Nmea sentences from port 4 (when this port is set as SeaTalk) did not have the terminating CR LF (carriage return & line feed).

Bonjour Luis j'ai installé la version 27.bin cela fonctionne correctement . la profondeur est correcte .Avec le seatalk1 j'affiche sur l'application tz iboat ,position du bateau ,COG ,SOG,HDG,DPT,TWS,TWD,AWS,TWA,AWA,SST ainsi que toutes les données de route .Luis tu as fait du bon travail merci encore .
Cordialement Alain

Dear Alain,

Thank you very much for confirming that Seatalk1 works OK.

Regards Luis