Search found 85 matches

by dagnall
Fri Mar 22, 2024 1:01 pm
Forum: Nmea4Wifi
Topic: Change Default SSID IP from 192.168.4.1
Replies: 0
Views: 45

Change Default SSID IP from 192.168.4.1

Some users have found issues where the NMEA multiplexer default IP of 192.168.4.1 clashes with that used by another wifi device. One solution is to change the NMEA Multiplexer from 192.168.4.1 to (eg 192.168.5.1) : This is done by writing the new IP in the "NAME" filed, separated by double dots ".."...
by dagnall
Tue Mar 12, 2024 11:23 am
Forum: N2K0183
Topic: N2K0183 as a Tool to Analyse the N2K bus
Replies: 3
Views: 14852

Re: N2K0183 as a Tool to Analyse the N2K bus

Just a quick addition: I have just downloaded and tried the 64bit V1.201.028, "TOOLKIT" and you are correct: it does not seem to see the N2000 data. I do note that the manual for the toolkit states" For viewing live NMEA 2000 or NMEA 0183 data we recommend our free NMEA Reader software, although thi...
by dagnall
Wed Mar 06, 2024 12:43 pm
Forum: N2K0183
Topic: Programmation du n2k0183
Replies: 2
Views: 190

Re: Programmation du n2k0183

Bonjour, and please excuse me responding in English!. Response speed and "Et Aussi le Reseau Externe". This setting is only if you wish to connect to an "external network". If you select this, the multiplexer tries continuously to connect to (in your case) "NETWORK_NAME". and this will take a lot of...
by dagnall
Wed Mar 06, 2024 10:33 am
Forum: Nmea4Wifi
Topic: Connecting to router in STN mode breaks NMEA out on p5
Replies: 20
Views: 1526

Re: Connecting to router in STN mode breaks NMEA out on p5

Paul. Sorry. I thought I had replied yesterday, but something got "stuck or lost"! VDO and VDM can be filtered.. Just use a filter e.g. "0-A-VDO" to accept (only) VDO messages. or "1-A-VDO-VDM" to accept VDO and VDM and to enforce checksum checking. (or "0-R-VDM" if you wish to reject VDM, and every...
by dagnall
Mon Mar 04, 2024 6:36 pm
Forum: Nmea4Wifi
Topic: Connecting to router in STN mode breaks NMEA out on p5
Replies: 20
Views: 1526

Re: Connecting to router in STN mode breaks NMEA out on p5

I am wondering therefore if you would be willing to amend the code to provide an option to enable the generation of HDT sentences to output P5 (without me having to enable Seatalk to P5 routing which would create a data loop). This could be calculated from the values in the HDG sentences (magnetic ...
by dagnall
Sat Feb 24, 2024 11:35 am
Forum: Nmea4Wifi
Topic: Connecting to router in STN mode breaks NMEA out on p5
Replies: 20
Views: 1526

Re: Connecting to router in STN mode breaks NMEA out on p5

Paul, Thanks, Just to add my apology for not responding faster! The Pico scope is a very nice product and the serial decode may be a feature Luis had missed! I have serial decode on my 4 ch lab scope but my USB scom DS1M12 is now well over 20 years old and never has Serial decode! That new one looks...
by dagnall
Wed Feb 21, 2024 11:28 am
Forum: Nmea4Wifi
Topic: Connecting to router in STN mode breaks NMEA out on p5
Replies: 20
Views: 1526

Re: Connecting to router in STN mode breaks NMEA out on p5

Paul, Luis asked if I could also look at your problem. I am not "fully up to speed", but I note that you have GPS sent to the VHF, and then VHF (4800) to P3 and combine this with GPS (P2 4800) out to the AIS.(also 4800). I understand the VHF>AIS connection (P3>P5) is to get (occasional!*) VHF DSC co...
by dagnall
Mon Jan 15, 2024 3:53 pm
Forum: N2K0183
Topic: NK20183 is great but I would like some new NK2 PNGs to 0183
Replies: 3
Views: 1949

Re: NK20183 is great but I would like some new NK2 PNGs to 0183

Jean - Phillipe, Many thanks for your suggestions! I am sorry for the delay in seeing this post! I will immediately start looking into adding those conversion requests!. I shall send you a PM with my personal Email, and perhaps we can correspond on this please? I may have to ask you for some more de...
by dagnall
Wed Dec 20, 2023 1:55 pm
Forum: N2K0183
Topic: N2K0183 as a Tool to Analyse the N2K bus
Replies: 3
Views: 14852

N2K0183 as a Tool to Analyse the N2K bus

To use the N2K0183 as a simple N2K bus analyser, it is necessary to first ensure that the N2K data is used/ sent to an output. (eg N2k>UDP is set). To avoid confusion, the debug mode only shows debug information for input data that is used by the multiplexer. In this example, there are no Serial inp...
by dagnall
Mon Oct 30, 2023 4:13 pm
Forum: Designing Wifi Multiplexers
Topic: General Notes on Navigation Apps and their usage
Replies: 0
Views: 15646

General Notes on Navigation Apps and their usage

Autopilot Control I will start by noting that there are very few apps (IOS at least) that will actually send out autopilot ('Pilot') commands to allow you to sail to waypoints: We can perhaps modify this list if we get more data: General point : To avoid sending lots or repetitive and duplicated "P...