Search found 5 matches

by Baltic Sailor
Thu Mar 21, 2024 1:58 am
Forum: N2K0183
Topic: Raymarine Autopilot EV1
Replies: 0
Views: 46

Raymarine Autopilot EV1

To control the newer Raymarine EV-200 Autopilot requires to have the PGN 126208. Is this PGN supported? quote of Opencpn manual: To make the EVO pilot work (or work well if you want) the most important is PGN 126208, which is the general “I can transfer pretty much anything” PGN, which is similar fo...
by Baltic Sailor
Fri Jun 03, 2022 1:40 pm
Forum: Nmea4Wifi
Topic: Connecting Silva 25mA Current Loop
Replies: 1
Views: 2646

Connecting Silva 25mA Current Loop

The old Silva Instruments are having only a current loop output. https://www.gotthardt-yacht.de/media/pdf/c0/45/64/Silva_Direction_D20_Bedienungsanleitung_Englisch.pdf Page Data I would like to connect it to the Mux. My sought: Connect a 470 ohm resistor between +12volt and Input A on the Mux and Da...
by Baltic Sailor
Fri May 27, 2022 11:51 am
Forum: Nmea4Wifi
Topic: 3X 4800 Baud Wind, Log, Depth
Replies: 0
Views: 6482

3X 4800 Baud Wind, Log, Depth

I would like to use the mux for wind,depth and log. I´m worried, that with the slow speed and update rate of 40 seconds, that the mux gets a data over run. the idea is to convert the data via another esp32 the data to nmea2000. The Nmea 2000 conversation I have already tested and it works. In additi...
by Baltic Sailor
Mon Aug 19, 2019 8:55 pm
Forum: Nmea2Wifi
Topic: Navionics Boating AIS connection
Replies: 16
Views: 40768

Re: Navionics Boating AIS connection

Hi Luis, I have also been sailing in the last 2 weeks in Germany, which is an Internet dessert... Also crashed some how the multiplexer firmware. Don't have a PC on board just two Android Tablets. Since I use the ONWA Kp-39A which has a build in AIS Transponder (even SOTDMA), new maps K-Chart 3.0 an...
by Baltic Sailor
Thu Aug 01, 2019 10:13 am
Forum: Nmea2Wifi
Topic: Navionics Boating AIS connection
Replies: 16
Views: 40768

Navionics Boating AIS connection

Hi, As you might know Navionics has now an AIS function in their Boating App. I understand from the Internet Two modes can be used IP addresse 0.0.0.0 port 2000 protocol UDP Or IP address 192.168.15.1 port 39150 protocol TCPIP. These should be the settings according to MARCO Navionics Support. My mu...